What’s a Cricut Machine? And other common questions
I know a lot of you out there probably just purchased Cricut machines and you’re wondering… okay, what the heck do I make?
Or… what is a Cricut machine, anyway? I’ll give a brief synopsis and then on to what they’re for.
(Seriously though, that Cricut guide I just linked is a LIFESAVER.)
A Cricut machine is a new kind of crafting machine which can make all of your cuts for you. If you work with paper or vinyl a lot, these things are lifesavers. The best part is that any design you make once you can make over and over, improving it each time and sharing it with your friends and family.
A Cricut works in a few steps:
- You set up your project in Cricut Design Space software, laying out exactly where you want each cut to be made.
- You specify the material type and size you’ll be using
- You load that material on to a Cricut mat (it’s like a self-healing mat but covered with a sticky adhesive for holding your material)
- Make sure your design looks right in Design Space
- Cut the design!
Like I mentioned in my other post, you can make so many different types of projects. I’ve made my own t-shirts using Cricut iron-on vinyl, mugs with adhesive vinyl, and lots of 3d pop-up cards (like, way too many).
Cricut machines used to use a physical cartridge that you’d plug into the machine to load in your design, but they’ve done away with those since the Expression. The new models (Maker/Explore/Joy) all use digital software to take care of your designs. If you still have older cartridges lying around, fear not! Cricut has an adapter where you can link them with your new machine.
If I was just picking out a machine for the first time, I’d probably go with the Cricut Maker or the Explore Air 2. Both have pretty good deals during the holidays, and there are just loads of tutorials. That site also has reviews of them, but if you just search you’ll find loads of other sites giving their opinion. It’s usually best to go to a few different sources and weigh them against each other, so you aren’t too influenced by the first comparison you read.
I really recommend having around 5 projects in mind before you buy a Cricut. If you have too many written down, you’ll get decision fatigue and have a tough time figuring out what to start on. If you don’t write down any, you’ll do what a lot of us do and keep your new Cricut in the box, slowly accumulating dust until you can’t even read what it is!
Having a clear idea of the kinds of crafts you want to work on is a great way of avoiding those two equally distressing fates. If you have a hard time getting started, just drop me a line and I’ll show you what I’ve been making lately!
Hope this helped clear things up, feel free to share this article if it was helpful.